The Green TamperColor® Tamper Evident Security Label Seal Sticker is a ready-to-deploy stock tamper seal requiring no custom print setup or lead time. Apply directly to your product, packaging, or asset for immediate tamper-evident protection. Available in a 500-label small operational supply, this Green micro-strip (0.75" x 0.25" / 19mm x 6mm) format is suited for low-volume ongoing operations and boutique security programs.

The vibrant green face is a universally recognized indicator of "clear" or "approved" status — making green TamperColor® labels particularly effective in quality control workflows, inspection programs, and supply chains where a green seal signals product release authorization. The high-visibility green immediately draws attention to tampering when the void pattern activates. The 0.75" x 0.25" (19mm x 6mm) micro-strip is the narrowest rectangular TamperColor® format — engineered for sealing thin packaging edges, SIM card slots, narrow device seams, and blister card perforations where standard-width labels cannot fit.

When any removal attempt is made, the TamperColor® label responds with an irreversible color-change void pattern — the proprietary adhesive system leaves a permanent, chromatic tamper-evident mark on both the label face and the substrate surface that cannot be cleaned off, reapplied, or disguised. Unlike standard tamper-evident labels that simply fragment or leave residue, TamperColor® creates a vivid color-pattern void that is immediately and unmistakably visible — even to untrained eyes at a glance.

The blank face can be hand-marked post-application or used as a clean, unprinted tamper indicator. For organizations needing printed content such as barcodes, serial numbers, or logos, see the Custom Print (CTC) or pre-printed Warranty Void (GTC) versions.

• Color: Green
• Size: 0.75" x 0.25" (19mm x 6mm) — micro-strip
• Shape: Rectangle
• Quantity: 500 labels — small operational supply
• Print: Blank Stock
• Tamper mechanism: Irreversible color-change void pattern on removal
• Applications: Quality control programs, food and beverage packaging, pharmaceutical lot release, and inspection-based security workflows

Stock labels ship from available inventory with no minimum order requirement for custom artwork. TamperColor® Green 0.75" x 0.25" micro-strip tamper evident stickers — color-coded security seals engineered to make product tampering impossible to hide.

The Green TamperColor® Tamper Evident Security Label Seal Sticker is a ready-to-deploy stock tamper seal requiring no custom print setup or lead time. Apply directly to your product, packaging, or asset for immediate tamper-evident protection. Available in a 500-label small operational supply, this Green micro circle (0.5" / 13mm) format is suited for low-volume ongoing operations and boutique security programs.

The vibrant green face is a universally recognized indicator of "clear" or "approved" status — making green TamperColor® labels particularly effective in quality control workflows, inspection programs, and supply chains where a green seal signals product release authorization. The high-visibility green immediately draws attention to tampering when the void pattern activates. The 0.5" (13mm) micro-circle is the smallest TamperColor® format — purpose-built for tiny closures, miniature components, small electronics ports, and compact vials where a larger seal would be impractical or visually overwhelming.

When any removal attempt is made, the TamperColor® label responds with an irreversible color-change void pattern — the proprietary adhesive system leaves a permanent, chromatic tamper-evident mark on both the label face and the substrate surface that cannot be cleaned off, reapplied, or disguised. Unlike standard tamper-evident labels that simply fragment or leave residue, TamperColor® creates a vivid color-pattern void that is immediately and unmistakably visible — even to untrained eyes at a glance.

The blank face can be hand-marked post-application or used as a clean, unprinted tamper indicator. For organizations needing printed content such as barcodes, serial numbers, or logos, see the Custom Print (CTC) or pre-printed Warranty Void (GTC) versions.

• Color: Green
• Size: 0.5" (13mm) — micro circle
• Shape: Circle
• Quantity: 500 labels — small operational supply
• Print: Blank Stock
• Tamper mechanism: Irreversible color-change void pattern on removal
• Applications: Quality control programs, food and beverage packaging, pharmaceutical lot release, and inspection-based security workflows

Stock labels ship from available inventory with no minimum order requirement for custom artwork. TamperColor® Green 0.5" micro circle tamper evident stickers — color-coded security seals engineered to make product tampering impossible to hide.

The Orange TamperGuard® Tamper Evident Security Label is a ready-to-deploy stock tamper seal requiring no custom print setup, lead time, or minimum order for artwork. Apply directly to your product, packaging, or asset for immediate non-residue tamper-evident protection. Available in a 500-label small operational supply, this Orange micro-strip (0.75" x 0.25" / 19mm x 6mm) format is designed for steady low-volume operations, boutique security programs, and specialty product lines.

The vivid neon orange face commands immediate visual attention — making orange TamperGuard® labels highly visible on both light and dark surfaces. Orange is widely associated with caution and high-visibility alerting, making this an effective deterrent color and an ideal choice for safety-sensitive applications, construction tools, and high-traffic environments. The 0.75" x 0.25" (19mm x 6mm) micro-strip is the narrowest rectangular TamperGuard® format — purpose-built for thin packaging seams, SIM card edges, device hinge lines, and narrow closures where a standard-width label would be impractical.

TamperGuard®'s defining advantage over standard tamper-evident labels is its non-residue adhesive system: when the label is removed or tampered with, the void pattern activates visibly on the label itself without leaving adhesive residue or ghost marks on the underlying surface. This makes TamperGuard® ideal for sensitive substrates, reusable equipment, high-gloss packaging, and any application where surface integrity must be maintained after a label is assessed or removed.

The blank face is available for hand-marking post-application or use as a clean tamper indicator. For branded print content including logos, sequential numbers, barcodes, or QR codes, see the Custom Print (CTG) version. For a pre-printed "Warranty Void" message, see the Warranty Void (GTG) version.

• Color: Orange
• Size: 0.75" x 0.25" (19mm x 6mm) — micro-strip
• Shape: Rectangle
• Quantity: 500 labels — small operational supply
• Print: Stock (Blank)
• Tamper mechanism: Void pattern on label — no residue left on surface
• Applications: Safety-sensitive equipment, construction tools, high-visibility asset tagging, food service equipment, and any application where maximum visual prominence is required

Stock TamperGuard® labels ship from available inventory — no artwork approval, no print lead time. TamperGuard® Orange 0.75" x 0.25" micro-strip tamper evident stickers — non-residue security seals engineered to protect surfaces and products without compromise.